The parts were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The carbide parts were surface etched, to create brightly contrasting white marks on the material. They were marked using approximately 7 watts of power, with a frequency of 25kHz, at a speed of 10 inches per second, resulting in a cycle time of 2.87 seconds.
![[No fade] LPC Product Animated WEBP](https://dev.laserphotonics.us/wp-content/uploads/2023/12/No-fade-LPC-Product-Animated-WEBP.webp "[No fade] LPC Product Animated WEBP")
