The part was laser marked with a 20-watt q-switched ytterbium fiber laser and a 160 mm focal length lens.
Process Parameters:
Material: Aluminum
Power: 12 Watts
Method used: Surface Etch
Frequency: 25 kHz
Depth: Surface
Speed: 10 inch/sec
Laser Type: Q-Switched Fiber Laser
Focal Length Lens: 160mm
Cycle Time: 2.15 seconds
![[No fade] LPC Product Animated WEBP](https://dev.laserphotonics.us/wp-content/uploads/2023/12/No-fade-LPC-Product-Animated-WEBP.webp "[No fade] LPC Product Animated WEBP")
