Laser cutting of the dashboard inset shapes was done at a low cutting speed to improve edge quality. The sample could be cut at a much faster speed but at the sacrifice of edge quality. A cycle time as low as 2.5 minutes could be performed. The cutting was done to the ABS substrate and double-sided tape, leaving the 3M tape and paper backing intact for application purposes.
| Sample Name: | Dashboard inset shapes | Working Distance: | 2mm |
| Material: | ABS substrate + double sided tape + 3M tape + paper | Power: | 14% (35W) average |
| Method Used: | Laser cutting | Frequency: | 500Hz modulated |
| Depth: | ABS substrate + double sided tape | Speed: | 10mm/sec |
| Laser Type: | 250W CW CO2 laser | Passes: | 1 |
| Focal Length Lens: | 3.75′ | Cycle Time: | ~12min |
![[No fade] LPC Product Animated WEBP](https://dev.laserphotonics.us/wp-content/uploads/2023/12/No-fade-LPC-Product-Animated-WEBP.webp "[No fade] LPC Product Animated WEBP")
