Laser marking of wooden door frames using a CO2 laser. Marked text was reorganized into 2 lines, so it could fit into a single working field of the recommended system (which is about 200x200mm). Other systems could be designed with a larger marking area. All four different wood parts were marked with the same parameters and produced excellent marks.
| Sample Name: | Doors | Working Distance: | 300mm |
| Material: | Different wood types | Power: | 100% (100W) |
| Method Used: | Laser marking | Frequency: | CW-mode |
| Depth: | Not measured | Speed: | 600mm/sec |
| Laser Type: | 100W CW CO2 laser | Passes: | 1 |
| Focal Length Lens: | 300mm | Cycle Time: | 2.8sec |
![[No fade] LPC Product Animated WEBP](https://dev.laserphotonics.us/wp-content/uploads/2023/12/No-fade-LPC-Product-Animated-WEBP.webp "[No fade] LPC Product Animated WEBP")
