by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System
by Dmitriy Nikitin | Aug 8, 2016 | Applications
A laser etched aluminum tool Process Parameters: Material: Aluminum Power: 12 Watts Method used: Surface Etch Frequency: 25 kHz Depth: Surface Speed: 10 inch/sec Laser Type: Q-Switched Fiber Laser Focal Length Lens: 160mm Cycle Time: 1.5 seconds...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20 watt q-switched ytterbium fiber laser and 160 mm focal length lens. Process Parameters: Material: Steel Power: 16 Watts Method used: Ablation Frequency: 80 kHz Depth: Surface Speed: 10 inch/sec Laser Type: Q-Switched Fiber Laser Focal...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The samples were marked using a 20 watt Q-switched Fiber Laser using a 160 mm lens. The Colt logo (vector graphic) was annealed using 15 Watts of power, frequency of 80 kHz, speed of 5″ per second, resulting in a cycle time of 8.65 seconds. The FBI logo (raster...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked with a 20-watt Q-switched Ytterbium fiber laser and a 160 mm focal length lens. The sample was ablated with the information provided by the customer to create a nice contrast mark. The sample was marked with an alphanumeric character and a line...
