by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Composite Method Used: Cutting Depth: Through Laser Type: CO2 Focal Length Lens: 300mm Power: 25% ~ 25 Watts Frequency: 5 kHz Speed: 25″ per sec Passes: 3 Cycle Time: 0.422 seconds The samples were cut using the F100 CO2 marking system equipped...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Acrylic Method Used: etch Depth: <.002 Laser Type: 20 Watt CW Fiber Laser Focal Length Lens: 254mm Power: 40% Speed: 10 inches per second Passes: 2 Cycle Time: 50.5 seconds Samples were processed using a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: PET Method Used: Cutting Depth: Through Laser Type: CO2 200W Focal Length Lens: 3.75″ lens Power: ~50 Watts Frequency: 4 kHz Speed: 200mm per sec Passes: 1 The samples were cut using the 200 Watt SMB 1200 FL cutting system. The PET film was cut...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Foam Method Used: Cutting Depth: Kiss & (Through) Laser Type: CO2 Focal Length Lens: 3.75″ Power: 40 Watts (60 Watts) Frequency: 3 kHz (3 kHz) Modulated Speed: 300mm (300mm) Passes: 1 The samples were...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Application Details The Application was done with a low power system in the lab. The recommendation for this process would be for a minimum of 100watt laser for projected cutting speeds of 1mm per second. 100-watt laser projected 50mm plus per second.200-watt laser...
by admin | Aug 8, 2016 | Applications
Material: Acrylic with protection tape Method Used: laser cut Depth: Through Laser Type: 250W CW CO2 laser Focal Length Lens: 5′ Power: 100% (250W average) Frequency: 10kHz modulated Speed: 250mm/sec Passes: 1 Sample...
