by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The steel sample was surface annealed, and required two passes each. The sample had the a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. Two passes were required to produce the dark mark using 16 watts of power, with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. Only a single pass was necessary to etch the light mark using 8 watts of power, with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
All the parts were marked using a 10 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The parts were surface anneal, to create contrasting marks. Process Parameters: Material: Carbide Power: 5 Watts Method used: Anneal Frequency: 35 kHz Depth:...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 10 watt q-switched ytterbium fiber laser and 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. Two passes were needed to darken the steel with out causing too much warping of the...
