by Dmitriy Nikitin | Aug 8, 2016 | Applications
The carbide, oxide coated and stainless steel were marked with a surface etch, the stainless steel was marked with a dark mark as well. A light etch is produces the most contrast when marking on carbide. Marks were made at the heights of 0.075”, 0.1” and 0.15” The...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Pulsed Fiber Laser using a 160 mm lens. The 3 small samples were annealed to create bright contrasting marks with the power of 12 Watts, frequency of 35 kHz, and speed of 4″ per second. The gauges were etched using 12 Watts...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The tool steel was marked with a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The part was deep engraved according to customer specifications. The part was marked at 3 inches per second using approximately 18 watts with a frequency of 25...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The tool steel was marked with a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The part was laser engraved (deep engraved) according to customer specifications. The part was marked at 3 inches per second using approximately 18 watts with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This aluminum tool was marked using a 20Watt Fiber Laser Marking System
