by Dmitriy Nikitin | Aug 8, 2016 | Applications
This steel tool was marked using a 20 Watt Fiber Laser Marking System
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The samples were marked using a 20 watt Q-switched Fiber Laser using a 160 mm lens. The Colt logo (vector graphic) was annealed using 15 Watts of power, frequency of 80 kHz, speed of 5″ per second, resulting in a cycle time of 8.65 seconds. The FBI logo (raster...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The titanium coated steel was engraved to create a dark mark on the surface of the samples. The parts were marked using approximately 17 watts of power, with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The carbide parts were surface etched, to create brightly contrasting white marks on the material. They were marked using approximately 7 watts of power, with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The part was surface annealed to create sharply contrasting marks. 16 watts of power...
