by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The samples were sprayed with TherMark to create brightly contrasting marks. The parts were marked using approximately 18 watts of power, with a frequency of 80kHz,...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The samples were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The parts were ablated, to burn off the anodization without engraving into the aluminum, creating brightly contrasting marks. The parts were marked using the laser...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This sample ID Tag was marked using a 20 watt Fiber laser marking system. The tag was surface annealed, to remove the paint and create contrasting marks.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20 Watt Pulsed Fiber Laser System using a 160 mm lens. The canister was marked with the same parameters for a light etched mark. The part was marked with a character height of 0.65”. The characters had a cycle time of 1.38...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The ID Tag was marked using a 20Watt Fiber Laser Marking System
