by Dmitriy Nikitin | Aug 8, 2016 | Applications
The various HMWPE (High Molecular Weight Polyethylene) were sent in for processing with our 20 watt fiber laser. The customer’s logo was generated and lased on all the various color samples and implants using various laser parameters to achieve the best overall...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This plastic key was marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The carbide was marked with a surface etch. A light etch is produced the most contrast when marking on carbide. The cycle time for marking on the part was only 0.83 seconds. A bolder font was used to enhance the mark. The parts were marked with a 10-watt q-switched...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The logo was marked on three different materials, each with different cycle times. The materials used were aluminum, painted aluminum, and steel. Two different-sized logos were marked on the steel sample. The large logo had a cycle time of 9.86 seconds and the small...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The logo was marked on three different materials, each with different cycle times. The materials used were aluminum, painted aluminum, and steel. On the aluminum sample, the cycle time for marking the logo was 3.75 seconds. On the painted aluminum 3 different sizes of...
