by Dmitriy Nikitin | Aug 8, 2016 | Applications
These brass parts were marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
These stainless steel parts were marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Chrome Plate Power: 18 Watt Method used: Surface Marking Frequency: 25 kHz Depth: Surface Speed: 15, 20, 30 inch/sec Laser Type: Q-Switched Fiber Laser Focal Length Lens: 160mm Cycle Time: Varies The parts were marked with a 20Watt Fiber Laser Marking System...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This steel part was marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This metal discs with a dark mark was marked with a 20 watt q-switched ytterbium fiber laser and required two passes. The first pass used 16 watts of power with a frequency of 20kHz and 160mm focal length lens. The first pass marked the part at 4 inches per...
