by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Pulsed Fiber Laser using a 160 mm lens. The samples were ablated using 9 watts of power, with the frequency of 20 kHz, speed of 20″ per second, resulting in a cycle time of 0.25 second for the scale marking, 0.92 second for...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The sample was surface etched, to create the light marks on the part. Samples were marked with process parameters to cause the least amount of damage to the surface...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This aluminum part was marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20 watt q-switched ytterbium fiber laser with 160mm focal length lens. The patch was marked first, and the 2D code and text were marked on top of it. The patch was surface etched onto the material using 14 watts of power, with a frequency...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This aluminum medical part was marked using a 20 Watt Fiber Laser Marking System.
