by Dmitriy Nikitin | Aug 8, 2016 | Applications
All samples were marked with the 20 Watt Fiber Laser Marking system using a 160 mm lens. Characters 0.070” tall were marked on all samples. Annealing was used to create the marks on Samples 1 and 2. Surface etching was used to mark Sample 3. Sample 2 was marked at...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Marks done with a speed of 250 mm/sec were done in 59.43 seconds (15 passes). Marks done with a speed of 600 mm/sec were done in 58.91 seconds (25 passes). Technology: Q-Switched Fiber Laser Wattage: 20 Watt Wavelength: 1060nm – 1070nm Focal Length Lens: 160mm...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking was accomplished using a 20 Watt Fiber Laser
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Using our LPQ series fiber laser configured with a 160mm focal length lens and testing various parameters, the automotive bearing was surface marked with 18 watts of power at 80 kHz and 4 inches per second. The total cycle time for the marks as shown was 6.82 seconds....
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt Fiber laser marking system. The part was surface annealed, to remove the paint and create contrasting marks.
