by Dmitriy Nikitin | Aug 8, 2016 | Applications
The Ferotek parts were marked with a 20-watt q-switched ytterbium fiber laser and a 160 mm focal length lens. The parts were surface etched to remove a layer of material and create a brightly contrasting mark. Process Parameters: Material: Ferotec Power: 14 Watts...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was done to duplicate the existing customer samples. To get the dark marks, multiple marking passes were needed. Three passes were needed total to the dark marks. The dark marks have a cycle time of 12.86 seconds and the light etch has a time of 4.68...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The dark UID marking was done to duplicate the existing customer samples. To get the dark marks, multiple marking passes were needed. Three passes were needed total to the dark marks. The dark marks have a cycle time of 12.86 seconds and the light etch has a time of...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The camshafts were marked with two types of marks. A dark mark as seen on the customer samples sent in with the application and a light etched mark. The light etch was done to get a contrasting mark with a shorter cycle time. The dark mark was done to duplicate the...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marked steel
