by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Anodized Aluminum Power: 9 Watt Method used: Etching Frequency: 30 kHz Depth: Surface Speed: 20 inches per second Laser Type: Q-Switched Fiber Laser Focal Length Lens: 160mm (170mm WD) Cycle Time: 2.47 Seconds Sample was marked with the 20 Watt Fiber Laser...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Stainless Steel Power: 8 Watt The method used: Etching Frequency: 35 kHz Depth: Surface Speed: 20 inches Laser Type: Q-Switched Fiber Laser Focal Length Lens: 160mm (170mm WD) Cycle Time: 4.45 Seconds The sample was marked with the 20 Watt Fiber Laser...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked with a 20 watt q-switched ytterbium fiber laser with a 160 mm focal length lens. This sample was engraved to create a deep mark that would not be damaged by sand blasting. The sample was produced using a fiber laser at a setting of 17 Watts, with...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked with a 20 watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The sample was laser engraved to create a deep mark that would not be damaged by sand blasting. The sample was produced using a fiber laser at a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. This sample surface etched, creating marks of substantial depth on the surface of the material. The process for this Sample used a fiber laser at a setting of 10...
