by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Silver plated 416 SS Power: 20 Watt The method used: Engraving Frequency: 40kHz Since there was not a rotary indexer configured at the time during the processing of this application, the most feasible solution was to rotate the parts by hand. The total...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Caterpillar Sample Parts Marking The samples marked extremely well with the 20-watt Fiber Laser Marking System. Dark marks were placed on all of the steel tappets. The steel tappets had a cycle time of 7.73 seconds. A high frequency was used to produce dark marks on...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Company: CAT The samples marked extremely well with the 20-watt Fiber Laser Marking System. Dark marks were placed on the steel tappets. The steel tappets had a cycle time of 7.73 seconds. A high frequency was used to get dark marks on steel.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Company: CAT Radial parts marking.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on automobile car vent plastic. The plastic air vent was marked using a 20 Watt Q-Switched Fiber Laser with a 160 mm lens. The part was etched using 5 Watts of power, frequency of 20 kHz, speed of 25″ per second. The cycle time for the mark was...
