by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Pulsed Fiber Laser using a 160 mm lens. The samples were annealed to create brightly contrasting marks. The Brass sample was engraved and lightly etched, each with its own cycle time. Engraved-1.63 secs, Light etch 2.18 secs....
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Q-Switched Fiber Laser with a 160 mm lens. The handles were marked inside of the requested area designated with a pink box. The parts were tested for contrast, but some of the plastics did not produce a contrasting mark. The...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking was accomplished using a 20 Watt Fiber Laser using a 160 mm lens. The steel was engraved using 18 Watts of power, frequency of 25 kHz, speed of 10″ per second, resulting in a cycle time of 2.75 seconds per row of numbers. Technology: Q-Switched...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The aluminum was marked with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The part was surface etched, to create a highly contrasting mark. The part was marked at 35 inches per second using approximately 16 watts with a frequency of 35...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was created using a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The marks were created on the parts using a 2 step process. First, the light patch...
