by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on automobile car vent plastic. The plastic air vent was marked using a 20 Watt Q-Switched Fiber Laser with a 160 mm lens. The part was etched using 5 Watts of power, frequency of 20 kHz, speed of 25″ per second. The cycle time for the mark was...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was accomplished with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The small gear sample was marked on both sides. The side with the etched mark had a cycle time of 0.977 seconds. The side with the dark anneal mark had a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The aluminum was marked with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The part was surface etched, to create a highly contrasting mark. The part was marked at 35 inches per second using approximately 16 watts with a frequency of 35...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The aluminum was marked with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The part was surface etched, to create a highly contrasting mark. The part was marked at 35 inches per second using approximately 16 watts with a frequency of 35...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on a steel sample
