by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Pulsed Fiber Laser using a 420mm lens. Three trials were made. The fastest marking trial was when 12 Watts of power was used with frequency of 20 kHz and speed of 40″ per second. The cycle time for this trial was 0.61 second...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Sample Name: “Dallas national golf club” logo Working Distance: 175mm Material: Stainless steel Power: 100% (20W average) Method Used: Laser marking Frequency: 20kHz Depth: ~0.3mm Speed: 300mm/sec Laser Type: Pulsed fiber laser Passes: 15...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser cutting of the dashboard inset shapes was done at a low cutting speed to improve edge quality. The sample could be cut at a much faster speed but at the sacrifice of edge quality. A cycle time as low as 2.5 minutes could be performed. The cutting was done to the...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking a pagoda image/picture on glass with a black background using a CO2 laser.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20 watt q-switched ytterbium fiber laser and 160 mm focal length lens. Process Parameters: Material: Steel Power: 16 Watts Method used: Ablation Frequency: 80 kHz Depth: Surface Speed: 10 inch/sec Laser Type: Q-Switched Fiber Laser Focal...
