by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20 watt q-switched ytterbium fiber laser and 160 mm focal length lens. Process Parameters: Material: Steel Power: 16 Watts Method used: Ablation Frequency: 80 kHz Depth: Surface Speed: 10 inch/sec Laser Type: Q-Switched Fiber Laser Focal...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Pulsed Fiber Laser using a 420 mm lens. All three samples were annealed with the speed of 3″ per second using frequency of 80 KHZ. Both 1 1/2″ OD and 2 1/4″ OD were annealed with the power of 17 watts while...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The tool steel was marked with a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The part was laser engraved (deep engraved) according to customer specifications. The part was marked at 3 inches per second using approximately 18 watts with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Pulsed Fiber Laser using a 160 mm lens. The 3 small samples were annealed to create bright contrasting marks with the power of 12 Watts, frequency of 35 kHz, and speed of 4″ per second. The gauges were etched using 12 Watts...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The carbide, oxide coated and stainless steel were marked with a surface etch, the stainless steel was marked with a dark mark as well. A light etch is produces the most contrast when marking on carbide. Marks were made at the heights of 0.075”, 0.1” and 0.15” The...
