by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. A dark surface mark was put on the part. The marks placed on the large tap had a cycle time of 4.43 seconds.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The cycle times for the part was below one second.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The cycle times for the part was below one second.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 10 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The part was surface etched, to create contrasting marks. Material: Carbide Steel Method used: Surface Etch Depth: Surface Laser Type: Q-Switched Fiber Laser Focal...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The carbide, oxide coated and stainless steel were marked with a surface etch, the stainless steel was marked with a dark mark as well. A light etch is produces the most contrast when marking on carbide. Marks were made at the heights of 0.075”, 0.1” and 0.15” The...
