by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The samples were etched to create brightly contrasting marks. Material: Painted & Anodized Aluminum Power: 15 watts Method used: Etching Frequency: 50kHz...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Pulsed Fiber Laser using a 420 mm lens. All three samples were annealed with the speed of 3″ per second using frequency of 80 KHZ. Both 1 1/2″ OD and 2 1/4″ OD were annealed with the power of 17 watts while...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. A dark surface mark was put on the part.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The ID Tag was marked using a 20Watt Fiber Laser Marking System
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The samples were etched to create brightly contrasting marks. Material: Aluminum Power: 20 watts Method used: Etching Frequency: 80kHz Depth: Surface Speed: 20...
