by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Foam Method Used: Cutting Depth: Kiss & (Through) Laser Type: CO2 Focal Length Lens: 3.75″ Power: 40 Watts (60 Watts) Frequency: 3 kHz (3 kHz) Modulated Speed: 300mm (300mm) Passes: 1 The samples were...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Glass Method Used: laser marking Depth: Surface Laser Type: 100W CW CO2 (10.6um) Focal Length Lens: 300mm Power: 10% Frequency: 5kHz modulated Speed: 500mm/sec Passes: 5 Cycle Time:...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Application Details The Application was done with a low power system in the lab. The recommendation for this process would be for a minimum of 100watt laser for projected cutting speeds of 1mm per second. 100-watt laser projected 50mm plus per second.200-watt laser...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: PET Method Used: Cutting Depth: Through Laser Type: CO2 200W Focal Length Lens: 3.75″ lens Power: ~50 Watts Frequency: 4 kHz Speed: 200mm per sec Passes: 1 The samples were cut using the 200 Watt SMB 1200 FL cutting system. The PET film was cut...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: stainless steel Power: 98% Method Used: annealed Frequency: 35 kHz Depth: <.001 Speed: 5 inches per second Laser Type: 20 Watt Q-Switch Fiber Laser Passes: 1 Lens Focal Length: 160mm Cycle...
