by Dmitriy Nikitin | Aug 8, 2016 | Applications
The carbide, oxide coated and stainless steel were marked with a surface etch, the stainless steel was marked with a dark mark as well. A light etch is produces the most contrast when marking on carbide. Marks were made at the heights of 0.075”, 0.1” and 0.15” The...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. A dark surface mark was put on the part. The marks placed on the large tap had a cycle time of 4.43 seconds.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. Two passes were required to produce the dark mark using 16 watts of power, with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The cycle times for the part was below one second.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This plastic part was marked using a 20 Watt Fiber Laser Marking System.
