by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The part was surface annealed to create sharply contrasting marks. 16 watts of power...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The part was surface annealed to create sharply contrasting marks. 16 watts of power...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The part was surface annealed to create sharply contrasting marks. 16 watts of power...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The part was surface annealed to create sharply contrasting marks. Cycle time varied on...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The scissor blades were marked using a 20-watt q-switched ytterbium fiber laser, along with a 160mm focal length lens. The blades were marked with a dark surface mark. Each mark was made with the intention of keeping the cycle at or below 4 seconds. The blades were...
