by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Chrome Plate Power: 18 Watt Method used: Surface Marking Frequency: 25 kHz Depth: Surface Speed: 15, 20, 30 inch/sec Laser Type: Q-Switched Fiber Laser Focal Length Lens: 160mm Cycle Time: Varies The parts were marked with a 20Watt Fiber Laser Marking System...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
These brass parts were marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
These aluminum parts were marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The logo was marked on three different materials, each with different cycle times. The materials used were aluminum, painted aluminum, and steel. Two different-sized logos were marked on the steel sample. The large logo had a cycle time of 9.86 seconds and the small...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20 watt q-switched ytterbium fiber laser with 160mm focal length lens. The patch was marked first, and the 2D code and text were marked on top of it. The patch was surface etched onto the material using 14 watts of power, with a frequency...
