by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Stainless steel and gold Power: 95% Method Used: etch Frequency: 20 kHz Depth: <.001 Speed: 10 inches per second Laser Type: 20 Watt Q-Switch Fiber Laser Passes: 10 Lens Focal Length: 160mm ...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Sample was processed using a 20 watt Q-switched fiber laser through a 160mm F-theta lens.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: stainless steel Power: 98% Method Used: annealed Frequency: 35 kHz Depth: <.001 Speed: 5 inches per second Laser Type: 20 Watt Q-Switch Fiber Laser Passes: 1 Lens Focal Length: 160mm Cycle...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser etching on carbide Process Parameters: Blacklite Wheel Material: Carbide Power: Etch: 9 Watts Engrave: 10 Watts Method used: Etching and Engraving Frequency: Etch: 30kHz Engrave: 35 kHz Depth: Surface Speed: Etch: 10 inch/sec Speed: Engrave: 7 inch/sec. Laser...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were engraved with a 20 watt q-switched ytterbium fiber laser and 160 mm focal length lens. The marks were done at 3 different depths using 2 passes, 4 passes and 6 passes. The artwork on the part was duplicated. Graphite 0.003 depth marked with 2 passes,...
