by Dmitriy Nikitin | Aug 8, 2016 | Applications
The various HMWPE (High Molecular Weight Polyethylene) were sent in for processing with our 20 watt fiber laser. The customer’s logo was generated and lased on all the various color samples and implants using various laser parameters to achieve the best overall...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The various HMWPE (High Molecular Weight Polyethylene) were sent in for processing with our 20 watt fiber laser. The customer’s logo was generated and lased on all the various color samples and implants using various laser parameters to achieve the best overall...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The various HMWPE (High Molecular Weight Polyethylene) were sent in for processing with our 20 watt fiber laser. The customer’s logo was generated and lased on all the various color samples and implants using various laser parameters to achieve the best overall...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The various HMWPE (High Molecular Weight Polyethylene) were sent in for processing with our 20 watt fiber laser. The customer’s logo was generated and lased on all the various color samples and implants using various laser parameters to achieve the best overall...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Blue leather with 3-mm thickness was marked and cut by a 10 watt CW CO2 laser with a 3.75-inch focal length lens. The speed of 50 mm/sec was used for etching surface with one pass and the speed of 10 mm/sec was set for cutting through the sheet with three passes....
