by Dmitriy Nikitin | Aug 8, 2016 | Applications
Process Parameters: Black Anodize Material: Black Anodized Power: 12 Watt The method used: Etch Frequency: 30 kHz Depth: Surface Speed: 15 inch/sec Laser Type: Q-Switched Fiber Laser Focal Length Lens: 160mm Cycle Time: 3.4 seconds The parts were laser marked with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was done with a 20-watt q-switched ytterbium fiber laser. The 160mm focal length lens has a working distance of 176mm from lens to part. The parts were marked with text as requested. Material: Nickel Plated – Fitting Power: 8 Watt Method used: Etch...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was done with a 20-watt q-switched ytterbium fiber laser. The 160mm focal length lens has a working distance of 176mm from lens to part. The parts were marked with text as requested. Process Parameters: Steel Fitting Material: Steel Power: 16 Watt Method...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20-watt q-switched fiber laser with 160 mm focal length lens. The part was annealed with logo and part number as requested. High contrast marks were achieved. Method: Annealing Power: 18 watts Speed: 5”/sec Frequency: 35 kHz...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The UID code was made with an etched mark using a 20Watt Fiber Laser Marking System with a 160 mm lens. The 2D code and serial number were readable. The cycle time for the 2D code was 2.23 seconds and the cycle time for the serial number was 2.3 seconds. The mark...
