by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Pulsed Fiber Laser using a 160 mm lens. The samples were annealed to create brightly contrasting marks. The Brass sample was engraved and lightly etched, each with its own cycle time. Engraved-1.63 secs, Light etch 2.18 secs....
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20-watt q-switched ytterbium fiber laser and a 160 mm focal length lens. The parts were surface etched and annealed to create a contrasting mark. Material: Steel Power: 18 Watts The method used: Etching & Annealing Frequency: 20 kHz...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on steel
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The plastic door handlers and trunk finishers were marked with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The paint film was ablated using 18 watts of power, a frequency of 30 kHz. The paint film on the largest trunk finisher looked...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The samples were marked with a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The paint film was ablated using 18 watts of power, frequency of 30 kHz. Due to the fact that the tallest marking would be in the 3 to 4 inch range, the 160-mm focal...
