by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser etched aluminum steel Material: Steel Power: 17 watts Method used: Etching Frequency: 25 kHz Depth: Surface Speed: 10 inch/sec. Laser Type: Q-Switched Fiber Laser Focal Length Lens: 160mm Cycle Time: 5.77 Seconds...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The tag was marked using a 20 Watt Fiber Laser Marking System
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The part was surface annealed to create sharply contrasting marks. Cycle time varied on...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The scissor blades were laser marked using a 20-watt q-switched ytterbium fiber laser, along with a 160mm focal length lens. The blades were marked with a dark surface mark. Each mark was made with the intention of keeping the cycle at or below 4 seconds. The blades...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Pulsed Fiber Laser using a 420 mm lens. All three samples were annealed with the speed of 3″ per second using frequency of 80 KHZ. Both 1 1/2″ OD and 2 1/4″ OD were annealed with the power of 17 watts while...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
All the parts were marked using a 10 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The parts were surface anneal, to create contrasting marks. Process Parameters: Material: Carbide Power: 5 Watts Method used: Anneal Frequency: 35 kHz Depth:...
