by Dmitriy Nikitin | Aug 8, 2016 | Applications
The tool steel was marked with a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The part was laser engraved (deep engraved) according to customer specifications. The part was marked at 3 inches per second using approximately 18 watts with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The cycle times for the part was below one second.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 10 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The part was surface etched, to create contrasting marks. Material: Carbide Steel Method used: Surface Etch Depth: Surface Laser Type: Q-Switched Fiber Laser Focal...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The samples were etched to create brightly contrasting marks. Material: Aluminum Power: 20 watts Method used: Etching Frequency: 80kHz Depth: Surface Speed: 20...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The tag was marked using a 20 Watt Fiber Laser Marking System
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The part was surface annealed to create sharply contrasting marks. 16 watts of power...
