by Dmitriy Nikitin | Aug 8, 2016 | Applications
The scissor blades were marked using a 20 watt q-switched ytterbium fiber laser, along with a 160mm focal length lens. The blades were marked with a dark surface mark. Each mark was made with the intention of keeping the cycle at or below 4 seconds. The blades were...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Pulsed Fiber Laser using a 160 mm lens. The 3 small samples were annealed to create bright contrasting marks with the power of 12 Watts, frequency of 35 kHz, and speed of 4″ per second. The gauges were etched using 12 Watts...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The cycle times for the part were below one second.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 10 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The part was surface etched, to create contrasting marks. Material: Carbide Steel Method used: Surface Etch Depth: Surface Laser Type: Q-Switched Fiber Laser Focal...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This plastic part was marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Aluminum Power: 18 watts – Paint Removal 18 watt – Etching Method used: Engraving Frequency: 25 kHz – Paint Removal 80 kHz – Etching Depth:...
