by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Copper Method Used: etch Depth: <.002 Laser Type: 20 Watt Q-Switch Fiber Laser Focal Length Lens: 160mm Power: 50%-98% Frequency: 20 kHz- 50 kHz Speed: 10 – 25 inches per second Passes: 2 Cycle Time:...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Composite Method Used: Cutting Depth: Through Laser Type: CO2 Focal Length Lens: 300mm Power: 25% ~ 25 Watts Frequency: 5 kHz Speed: 25″ per sec Passes: 3 Cycle Time: 0.422 seconds The samples were cut using the F100 CO2 marking system equipped...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Acrylic Method Used: etch Depth: <.002 Laser Type: 20 Watt CW Fiber Laser Focal Length Lens: 254mm Power: 40% Speed: 10 inches per second Passes: 2 Cycle Time: 50.5 seconds Samples were processed using a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: PET Method Used: Cutting Depth: Through Laser Type: CO2 200W Focal Length Lens: 3.75″ lens Power: ~50 Watts Frequency: 4 kHz Speed: 200mm per sec Passes: 1 The samples were cut using the 200 Watt SMB 1200 FL cutting system. The PET film was cut...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Sample was processed using a 20 watt Q-switched fiber laser through a 160mm F-theta lens.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Stainless steel and gold Power: 95% Method Used: etch Frequency: 20 kHz Depth: <.001 Speed: 10 inches per second Laser Type: 20 Watt Q-Switch Fiber Laser Passes: 10 Lens Focal Length: 160mm ...
