by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on steel accomplished using a 20 Watt Fiber Laser
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The sample was marked with a 10 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The sample was surface annealed to create contrast mark. Painted Brass and Anodize...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Both samples were marked using a Fiber Laser Marking system with a laser at 9 Watts and frequency of 25kHz. Sample 1 – Aluminum was marked at a rate of 50 inches per second, for a cycle time of 2.05 seconds. Sample 2 – Anodized Aluminum was marked at a rate of 20...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
These aluminum parts were marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The various HMWPE (High Molecular Weight Polyethylene) were sent in for processing with our 20 watt fiber laser. The customer’s logo was generated and lased on all the various color samples and implants using various laser parameters to achieve the best overall...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This plastic part was marked using a 20 Watt Fiber Laser Marking System.
