by Dmitriy Nikitin | Aug 8, 2016 | Applications
This plastic piece was marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on stainless steel was accomplished using a 20 Watt Fiber Laser
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were laser ablated with a 10 watt q-switched ytterbium fiber laser and 420 mm focal length lens. The 420mm focal length lens has a working area of 420mm square. The parts were surface ablated to created good contrast on the samples....
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser markings on aluminum keychains
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This plastic sample was marked using a 20Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This metal discs with a dark mark was marked with a 20 watt q-switched ytterbium fiber laser and required two passes. The first pass used 16 watts of power with a frequency of 20kHz and 160mm focal length lens. The first pass marked the part at 4 inches per...
