by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser cut leather
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The gun parts were marked using a 20-Watt Q-Switched Fiber Laser with a 160-mm lens. The parts were marked with 3 different types of Bushmaster logos. The parts were marked for contrast using the logos that were supplied by the customer.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The samples were marked with a 10-watt q-switched ytterbium fiber laser with 160 mm focal length lens. They were surface etched, to create brightly contrasting marks. The parts were marked at a speed of 10 inches per second, using about 7 watts of power, with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The sample was marked with a 10 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The sample was surface annealed to create contrast mark. Painted Brass and Anodize...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked with a 10 watt q-switched ytterbium fiber laser and a 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The part was surface marked to create contrast on the sample. This titanium piece was...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The logo was marked on three different materials, each with different cycle times. The materials used were aluminum, painted aluminum, and steel. Two different-sized logos were marked on the steel sample. The large logo had a cycle time of 9.86 seconds and the small...
