by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The part was marked with both a light etch and a dark surface mark. The light etched marks had a cycle time of 0.275 seconds and the dark surface marks had a time of 1.86 seconds. If...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was done with a 20-watt q-switched ytterbium fiber laser. The 160mm focal length lens has a working distance of 176mm from lens to part. The parts were marked with text as requested. Process Parameters: Steel Fitting Material: Steel Power: 16 Watt Method...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The paint was removed from the plastic parts using a 10-watt Fiber Laser Marking System. The parts were marked with the intent to burn away the paint without burning the plastic underneath without causing any of the damage as with the previous application. The paint...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Using our LPQ series fiber laser configured with a 160mm focal length lens and testing various parameters, the automotive bearing was surface marked with 18 watts of power at 80 kHz and 4 inches per second. The total cycle time for the marks as shown was 6.82 seconds....
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser markings on steel
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking on the part was accomplished using a 20 Watt Fiber Laser Marking System with a 160mm lens. The 160mm focal length lens has a working distance of 176mm from lens to part. A light square box was marked first; the 2D code was marked over the box. The first...
