by Dmitriy Nikitin | Aug 8, 2016 | Applications
Company: CAT The samples marked extremely well with the 20-watt Fiber Laser Marking System. Dark marks were placed on the steel tappets. The steel tappets had a cycle time of 7.73 seconds. A high frequency was used to get dark marks on steel.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Glass marking was done with a Synrad 48-2 25 watt CW CO2 laser with a FLA125 focal length lens. The glass was marked using a power of 25 watts at a speed of 25” per second, resulting in a cycle time of 0.52 seconds. The font was a simple stroke. The material provided...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 10-watt q-switched ytterbium fiber laser and a 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The parts were surface marked to created contrast on the samples. The titanium piece...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 10Watt Fiber Laser Marking System using a 160 mm lens. The parts were marked with both an etched mark as per the enclosed sample. The 2D code was marked off the edge as requested. The cycle time for the text along with the 2D code was 2.21...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was accomplished with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The small gear sample was marked on both sides. The side with the etched mark had a cycle time of 0.977 seconds. The side with the dark anneal mark had a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Caterpillar Sample Parts Marking The samples marked extremely well with the 20-watt Fiber Laser Marking System. Dark marks were placed on all of the steel tappets. The steel tappets had a cycle time of 7.73 seconds. A high frequency was used to produce dark marks on...
