by Dmitriy Nikitin | Aug 8, 2016 | Applications
The samples were marked with a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The paint film was ablated using 18 watts of power, frequency of 30 kHz. Due to the fact that the tallest marking would be in the 3 to 4 inch range, the 160-mm focal...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser markings on steel
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 10-watt q-switched ytterbium fiber laser marking system with a 160 mm focal length lens. The parts were surface etched, to create a contrasting mark. The sample parts with the serial number 3417210 resulted in a cycle time of 1.74 seconds....
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were laser marked using a 20-watt q-switched ytterbium fiber laser with a 160mm focal length lens. The parts were surface marked to create brightly contrasting marks. The parts were marked using various parameters, resulting in various cycle times,...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Medical Tool
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This ceramic medical part was laser marked using a 20 Watt Fiber Laser Marking System.
