by Dmitriy Nikitin | Aug 8, 2016 | Applications
The canisters were marked using the 20-watt q-switched ytterbium fiber laser, along with a 160 mm focal length lens. In order to get the marks along the outside diameter of the parts, each part was held in a fixture that allowed for manual rotation. Each part was...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The canisters were marked using the 20-watt q-switched ytterbium fiber laser, along with a 160 mm focal length lens. In order to get the marks along the outside diameter of the parts, each part was held in a fixture that allowed for manual rotation. Each part was...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was done using a 20Watt Fiber Laser Marking System, a light etch was placed on the parts. A light etch was used due to the reflective nature of the metal, an etched mark would produce the best contrast. The code along with the text marked on the steel hub...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was accomplished using a 20Watt Fiber Laser Marking System. A light etch was placed on the parts. A light etch was used due to the reflective nature of the metal, an etched mark would produce the best contrast. The code along with the text marked on the...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The UID was marked on this steel part using a 20 Watt Fiber Laser Marking System.
