by Dmitriy Nikitin | Aug 8, 2016 | Applications
The Application was done with a low power system in the lab. The recommendation for this process would be for a minimum of 100watt laser for projected cutting speeds of 1mm per second. The Clear Acrylic can be processed at a fast speed. 100-watt laser projected 50mm...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Hendricks Motorsports – “In Loving Memory, Papa Joe Hendrick 1919-2004” This part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. Since the part was so large, in order to put a mark across the whole part the marking was...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser Marked Harley Davidson Motor Cycles Logo Laser etching was done on the chrome piece (gas tank cap) without going through the chrome. The Harley Davidson logo was marked on the top of the rounded parts using a 20-watt Q-switched Fiber laser with a 160...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20-watt q-switched ytterbium fiber laser marking machine and a 160 mm focal length lens. The parts were surface etched to remove a layer of material and create a brightly contrasting mark. Process Parameters: Material: White Zirconia...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20-watt q-switched ytterbium fiber laser marking machine with a 160 mm focal length lens. The parts were engraved, to create contrasting marks on the material. The parameters for both the carbide and steel samples were the same. They were...
