by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marked steel
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20-watt q-switched ytterbium fiber laser with a 160mm focal length lens. The parts marked according to customer request. The alphanumeric mark IRGCO was etched onto the material using 20 watts of power, with a frequency of 50kHz, and at a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20-watt q-switched ytterbium fiber laser with a 160mm focal length lens. The parts marked according to customer request. The serial number S1811Y-RP was etched onto the material using 10 watts of power, with a frequency of 20kHz, at a speed...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This application was done with a low power system in the lab. The recommendation for this process, for the grey bulk molding compound, would be for a minimum of 100watt laser for projected cutting speeds of 1mm per second. The preferred system would be a 200watt laser...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The Application was done with a low power laser system in the Application Testing & Research Lab. The recommendation for this process would be for a minimum of 100watt laser for projected cutting speeds of 1mm per second. The Clear Acrylic can be processed at a...
