by Dmitriy Nikitin | Aug 8, 2016 | Applications
The samples were marked with a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The paint film was ablated using 18 watts of power, frequency of 30 kHz. Due to the fact that the tallest marking would be in the 3 to 4 inch range, the 160-mm focal...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The plastic door handlers and trunk finishers were marked with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The paint film was ablated using 18 watts of power, a frequency of 30 kHz. The paint film on the largest trunk finisher looked...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on steel
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20-watt q-switched ytterbium fiber laser and a 160 mm focal length lens. The parts were surface etched and annealed to create a contrasting mark. Material: Steel Power: 18 Watts The method used: Etching & Annealing Frequency: 20 kHz...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was created using a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The marks were created on the parts using a 2 step process. First, the light patch...
