by Dmitriy Nikitin | Aug 8, 2016 | Applications
The plastic door handlers were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The working distance from the bottom of the lens housing to the painting surface was set at 180 mm (including 5 mm focal offset).
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The Hasselalloy-Nickel based bracket and Grommet were marked using a 20 Watt Q-Switched Fiber Laser with a 160 mm lens. The parts were annealed using 18 Watts of power, frequency of 35 kHz, speed of 5″ per second. 2D matrix code was read in the lab with a Symbol...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
A steel sample that was laser marked
by Dmitriy Nikitin | Aug 8, 2016 | Applications
2D Barcode / UID Marking on Curved Titanium Surface.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was accomplished with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The small gear sample was marked on both sides. The side with the etched mark had a cycle time of 0.977 seconds. The side with the dark anneal mark had a...
