by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: rubber Power: 50% Method Used: Laser etching Frequency: 20khz Depth: <.002 Speed: 20 inches per second Laser Type: 20 Watt Q-Switch Fiber Laser Passes: 1 Focal Length Lens: 160mm...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The samples were marked using a 20 watt Q-switched Fiber Laser using a 160 mm lens. The Colt logo (vector graphic) was annealed using 15 Watts of power, frequency of 80 kHz, speed of 5″ per second, resulting in a cycle time of 8.65 seconds. The FBI logo (raster...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were engraved with a 20 watt q-switched ytterbium fiber laser and 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The marks were done at 3 different depths using 2 passes, 4 passes and 6 passes. The...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking of a butterfly photo on glass with a black background using a CO2 laser.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: plastic Power: 40% Method Used: etch Frequency: Depth: <.001 Speed: 20 inches per second Laser Type: 20 CW Fiber Laser Passes: 2 Focal Length Lens: 254mm Cycle Time: 3.5...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20 watt q-switched ytterbium fiber laser and 160 mm focal length lens. Process Parameters: Material: Steel Power: 16 Watts Method used: Ablation Frequency: 80 kHz Depth: Surface Speed: 10 inch/sec Laser Type: Q-Switched Fiber Laser Focal...
