by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The cycle times for the part was below one second.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was laser marked with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. This sample was surface etched, creating a light mark on the surface of the material. This process utilized the laser at a power setting of 9 Watts, with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The samples were etched to create brightly contrasting marks. Material: Painted & Anodized Aluminum Power: 15 watts Method used: Etching Frequency: 50kHz...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 10 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The parts were surface etched, to create contrasting marks. Various speeds and frequencies were used to create different sized marks of various depths....
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The part was surface annealed to create sharply contrasting marks. 16 watts of power...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This steel wheel was marked using a 20 Watt Fiber Laser Marking System
