by Dmitriy Nikitin | Aug 8, 2016 | Applications
This steel tool was marked using a 20 Watt Fiber Laser Marking System
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This application was done with a low power system in the lab. The recommendation for this process, for the grey bulk molding compound, would be for a minimum of 100watt laser for projected cutting speeds of 1mm per second. Preferred system would be a 200watt laser...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20 Watt Pulsed Fiber Laser System using a 160 mm lens. The canister was marked with the same parameters for a light etched mark. The part was marked with a character height of 0.65”. The characters had a cycle time of 1.38...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20 watt q-switched ytterbium fiber laser and 160 mm focal length lens. The parts were surface etched to create brightly contrasting marks.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This steel tool was marked using a 20 Watt Fiber Laser Marking System
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The scissor blades were marked using a 20 watt q-switched ytterbium fiber laser, along with a 160mm focal length lens. The blades were marked with a dark surface mark. Each mark was made with the intention of keeping the cycle at or below 4 seconds. The blades were...
