by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The carbide parts were surface etched, to create brightly contrasting white marks on the material. They were marked using approximately 7 watts of power, with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The scissor blades were marked using a 20 watt q-switched ytterbium fiber laser, along with a 160mm focal length lens. The blades were marked with a dark surface mark. Each mark was made with the intention of keeping the cycle at or below 4 seconds. The blades were...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The cycle times for the part was below one second.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20 watt q-switched ytterbium fiber laser with 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The steel sample was surface annealed, and required two passes each. The sample had the a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser cutting of MagX vinyl laminated magnetic sheeting: Flexible magnetic sheets with three kinds of thickness of 0.006”, 0.020”, and 0.030” were cut using a 20-watt Laser Photonics BlackStar Fiber Laser. The strips with 5.5” x 2” were cut using 18 watts of power and...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on stainless steel accomplished using a 20 Watt Fiber Laser
